I kind of got carried away with the Planking and attaching the Wales along the Gun Deck.
Anyway… I’m stopping long enough to make this Post.
I got the first set of Wales done on the Starboard and I started working my way up the Gun Ports with the 1mm x 3mm Tanganyika Lathes.
The first Strip of 3mm Tanganyika Lathes, I trimmed about 1mm off of it using my Miniature Table Saw so that I would fit under the Gun Ports evenly while being above the 3mm Walnut Lathe underneath it.
I screwed up and used the wrong Lathes for the Bollards along the after Bollards. I used 1.5mm Lathes instead of the 1mm ones.