Obviously this is a what is called a “Plank on Bulkead” type of Ship Model. Where you lay the Planks across the entire Hull structure of the Ship.
After sliding the Bulkheads in, which they slid in beautifully, by the way… Usually these kits are far from “Exact” on their cutting. This one by Occre is good though.
This Basswood strip is for stabilizing the Bulkheads to one another.
My first problem just came up though. It just occurred to me that I need a Jig to hold the False Keel straight while I am able to get the False Keel straight while the glue has time to set.
The False Keel is bent a bit, but I don’t think it will be a problem because I’ll use the Jig and the forcing by the Planks that I glue in the future to hold it straight. It won’t take but about 2 or 3 Planks to be able to do that
Not the worst Warp I’ve seen though… 🙄🤔😫
I was just looking ahead at the Instructions. On this ship, they have you building it from the Top Down. I think I’m going to start it from bottom up though.