Filler Cheater on #14 Strake from Keel

Filler Cheater

I had to make these Fillers to even up the Gap so now I have exactly 25 mm on most of the Hull, which equals 5 Strakes.

Form bending

This next Strake is still going to be a Filler. I’m just pre-bending and I will shave off the excess so that it will be approximately 4 mm wide until it tapers to the Stern. I am only going to have 4 Strakes going through the narrow Channel and flare out to 5 mm at the Stern Post.

The narrow Channel where 4 Planks will go through

I have just enough room for four 5 mm Planks at the end.

Facebook Comments Box

Leave a Reply