My first Gun Port. I figured I better cut all of these out before I do the Painting.

The Gun Port itself is 12x12mm.

For the Gun Port Doors, I’m making some. This kit didn’t really provide the adequate parts so I had to make my own out of spare Lumber that I have.

X-Acto #24 Precision Blades is my main tool for this. I carefully push it into the wood. Unfortunately for this first Door, I went right into a Bulkhead!!! .. 🤔🙄😲

As you can see, I used some Masking Tape, which I cut right through! ..

I’m really annoyed with myself that I accidentally made the 4 Stern most Gun Ports too big. They are supposed to be 10mm Square and I made them 12mm Square and 13 in one case!!! .. Why did I do that???!!! .. Fuck if I know!!! .. 🤔🙄😲

So annoyed with myself!!!

The 2 Forward most Gun Ports are 10mm Square though.

Port side is correct… I screwed up on the Starboard side but I am not going to mention it because it will be barely noticeable…