Tag Archives: Bulwark filling

Filler Plank for Bulwark

I made a mistake on the original Plank so I had to make this Plank to fill it in.

I used my Plank Bending Jig to bend it. I let it sit all night to make sure it takes the bend. It came out pretty nicely.

Plank Bending Jig
Bent rather nicely I must say…

I traced it out by sticking this Scotch Tape across the Gap and using a marker pen. Then stuck it on the Plank as a Template.

Stuck it on, cut the outline out with Xacto and traced line
Before taking off excess
After a lot of filing got it fitted
Doing same thing to Port side
Aligning it
Port side Bulwark gluing in
I guess it came out about the same