Just drilled out these holes for the Posts for the Hatch Deck Handrails.
Bending these 2 Walnut 1x3mm for the after Handrails.
As before with bending, I soaked them in Ammonia + Water for a couple of hours.
I had to use some flexible beechwood which I cut down to approximately 1x3mm
I swear this Flexible Beechwood works great for this sort of application.
The only drawback is that it’s really expensive. The only source I could find for it was from Modelers Central and I’d say just for a couple of strips it cost me about $30 bucks!