Tag Archives: deadwood

Deadwood

Attaching the Deadwood with the Rudder will eventually attach to.

I needed this on before proceeding any further since I need to both work on it and make my measurements with it in place.

I will eventually be taking a lot of wood off from it. Since the Planking will go over it, I need to thin it put to compensate for it.

I’ll take off approximately 1/2 off the thickness of the Deadwood.

Then, after I install the Planking, I’ll be able to sand it down so the thickness will be even with the Rudder.

Clamping on Deadwood
This is how much wood I’m taking off the Deadwood
I took down the Deadwood from 4mm to 2mm